Leeson SCR Thyristor Motor Control Uživatelský manuál stáhnout pdf (Strana 41)

SPEEDMASTER™ OPERATION MANUAL

Calibration

Warning

Dangerous voltages exist on the drive when it is powered.

When possible, disconnect the voltage input from the drive

before adjusting the trimpots. If the trimpots must be

adjusted with power applied, use insulated tools and the

appropriate personal protection equipment. BE ALERT.

High voltages can cause serious or fatal injury.



Each drive is factory calibrated to its maximum current rating.

Readjust the calibration trimpot settings to accommodate lower

current rated motors.

All adjustments increase with CW rotation, and decrease with

CCW rotation. Use a non-metallic screwdriver for calibration.

Each trimpot is identified on the printed circuit board. Refer to

Figures 18 and 19 (pages 41-42) for typical TORQUE LIMIT and

IR COMP settings.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Žádné komentáře

Leeson SCR Thyristor Motor Control Uživatelský manuál Strana 41